Dissolution and sorption of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX) and 2,4,6-trinitrotoluene (TNT) residues from detonated mineral surfaces

Composition B (Comp B) is a commonly used military formulation composed of the toxic explosive compounds 2,4,6-trinitrotoluene (TNT), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). Numerous studies of the temporal fate of explosive compounds in soils, surface water and laboratory batch reactors have been conducted. However, most of these investigations relied on the application of explosive compounds to the media via aqueous addition and thus these studies do not provide information on the real world loading of explosive residues during detonation events. To address this we investigated the dissolution and sorption of TNT and RDX from Comp B residues loaded to pure mineral phases through controlled detonation. Mineral phases included nontronite, vermiculite, biotite and Ottawa sand (quartz with minor calcite). High Performance Liquid Chromatography and Attenuated Total Reflectance Fourier Transform Infrared spectroscopy were used to investigate the dissolution and sorption of TNT and RDX residues loaded onto the mineral surfaces. Detonation resulted in heterogeneous loading of TNT and RDX onto the mineral surfaces. Explosive compound residues dissolved rapidly (within 9 h) in all samples but maximum concentrations for TNT and RDX were not consistent over time due to precipitation from solution, sorption onto mineral surfaces, and/or chemical reactions between explosive compounds and mineral surfaces. We provide a conceptual model of the physical and chemical processes governing the fate of explosive compound residues in soil minerals controlled by sorption-desorption processes.     

Agricultural landscapes as multi-scale public good and the role of the Common Agricultural Policy

During the last 50 years, the Common Agricultural Policy (CAP) has impacted the evolution of European agricultural landscapes by driving changes in land use and farming practices. We propose a typology characterising the scales relevant for agricultural landscapes management and argue that action is required on three scales: (1) a landscape oriented management at the farm level; (2) the coordination of land managers’ actions at the landscape level; and (3) the conservation of the diversity of agricultural landscapes in the EU. We provide evidence that until now the CAP has mainly focused on the first scale. We also illustrate how agricultural policy could encourage coordinated actions at the landscape- and EU-scales. In particular, we propose policy instruments to coordinate actions of individual land owners (e.g. collective bonus in agro-environmental contracts or support to environmental cooperatives (scale 2)). We also analyse how the recognition and transposition of the European Landscape Convention could promote trans-frontier landscape cooperation in order, not only to conserve high-quality rural landscapes, but also to ensure the conservation of the diversity of EU landscapes (scale 3). This paper provides a knowledge base to support an integrated CAP design in the direction of improved landscape management, as an important component of the EU project towards more sustainable agriculture.     

Short-term interactions of aniline and benzidine with three soils in both natural and artificial matrices

The fate of aromatic amines in natural systems is important to understand due to the persistence and toxicity of these chemicals. Laboratory experiments were performed to elucidate aniline and benzidine behavior in silty-clay, sandy loam, and sandy soils, and six background matrices (rainwater, 12.5 mM CaCl(2), 25 mM CaCl(2), and each passed through soil columns). The goals of this study were to test the validity of using CaCl(2) as a laboratory simulation for rainwater and to observe how short-term sorption (24 h) of aniline and benzidine changed when these solutions were passed through soil columns. Results indicated that neither CaCl(2) solution exactly predicted the sorption of these chemicals in corresponding rainwater solutions, likely due to varying soil properties that influenced the sorption mechanisms. Statistical analyses revealed that the passage of rainwater or CaCl(2) solutions through soil columns did not significantly affect the sorption of aniline or benzidine. Cation exchange and solubility plots were created to identify the sorption mechanisms taking place in the short-term batch experiments. These plots indicated that cation exchange played a role in the sorption of both aniline and benzidine under all conditions, while solubility plots showed higher correlations for benzidine, a consequence of its lower aqueous solubility.     

Is it time for routine prenatal serological screening for congenital cytomegalovirus?

Congenital CMV infection (cCMV) is the most prevalent congenital infection, main non-genetic cause of sensorineural hearing loss (SNHL) and major cause of neurological disability. Despite the burden of cCMV, no Public Health body recommends universal serology screening in pregnancy. This was explained by gaps in knowledge of epidemiology, diagnosis, prognosis and the absence of any validated treatment. Over 10 years, progress has been made in our understanding of cCMV following primary maternal infection. Risk factors have been identified and quantified, notably it is now well recognized that among maternal primary infections only those occurring in the first trimester may lead to long-term sequelae. Algorithms combining IgG, IgM, and IgG avidity detection with serological assays adapted on high throughput platforms have demonstrated high sensitivity and specificity to diagnose maternal primary infection. The prognostic value of prenatal imaging combining ultrasound and MRI has been validated by many studies. Finally, recent data from a randomized controlled study demonstrated the efficacy of early antiviral therapy to prevent vertical transmission. Whether CMV serology screening in the first trimester of pregnancy meets the WHO's criteria for a screening program will therefore be reviewed.     

Solid phase microextraction (SPME) as an effective means to isolate degradation products in polymers

A new sample preparation technique, solid phase microextraction (SPME), was compared with direct headspace-GC-MS with respect to the type and amount of identified compounds. Three types of LDPE films containing photosensitising additives according to the Scott-Gilead patents and pure LDPE were used as model substances. The polyethylene films were thermally aged at 80‡C after the induction period was surpassed by subjecting the materials to 100 h of UV radiation. The new SPME method was developed using nonpolar poly(dimethylsiloxane) and polar carbowax fibers to extract the low molecular weight products formed in the polyethylene films during aging. Many more products were identified after SPME followed by GC-MS than after direct headspace-GC-MS of the samples. The SPME method allowed the identification of homologous series of carboxylic acids, ketones, and furanones, while direct headspace-GC-MS identified only a few carboxylic acids (C1-C6) and small amounts of some ketones and furanones. In general, SPME was more effective in extracting less volatile products, and in particular, the polar carbowax fiber identified also C7-C12 carboxylic acids and 4-oxopentanoic acid. By SEC and FTIR we confirmed that the number and amount of former degradation products correlated well with the decrease in molecular weights and the amount of formed carbonyl compounds.     

Airborne thermal degradation products of polyurethene coatings in car repair shops

A methodology for workplace air monitoring of aromatic and aliphatic, mono- and polyisocyanates by derivatisation with di-n-butylamine (DBA) is presented. Air sampling was performed using midget impinger flasks containing 10 ml of 0.01 mol l(-1) DBA in toluene and a glass-fibre filter in series after the impinger flask, thereby providing the possibility of collecting and derivatising isocyanates in both the gas and particle phases. Quantification was made by LC-MS, monitoring the molecular ions [MH]+. Air samples taken with this method in car repair shops showed that many different isocyanates are formed during thermal decomposition of polyurethane (PUR) coatings. In addition to isocyanates such as hexamethylene (HDI), isophorone (IPDI), toluene (TDI) and methylenediphenyl diisocyanate (MDI), monoisocyanates such as methyl (MIC), ethyl (EIC), propyl (PIC), butyl (BIC) and phenyl isocyanate (PhI) were found. In many air samples the aliphatic monoisocyanates dominated. During cutting and welding operations, the highest levels of isocyanates were observed. In a single air sample from a welding operation in a car repair shop, the highest concentrations found were: MIC, 290; EIC, 60; PIC, 20; BIC, 9; PhI, 27; HDI, 105; IPDI, 39; MDI, 4; and 2,4-TDI and 2,6-TDI 140 microg m(-3). Monitoring the particle size distribution and concentration during grinding, welding and cutting operations showed that ultrafine particles (< 0.1 microm) were formed at high concentrations. Isocyanates with low volatility were mainly found in the particle phase, but isocyanates with a relatively high volatility such as TDI, were found in both the particle and gas phases.